| Doubly Excitated Synchronous Machines for Traction Applications | 0 | 0.34 | 2021 |
| Multiphysic Design and Modeling of Rotating Electrical Machines | 0 | 0.34 | 2021 |
| Applicability of Superposition Equivalent Loading Method for Induction Machine Temperature Tests | 0 | 0.34 | 2018 |
| A New Laboratory for Hands-on Teaching of Electrical Engineering. | 0 | 0.34 | 2018 |
| Fast Characterization of AC Windings | 0 | 0.34 | 2018 |
| Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices. | 1 | 0.37 | 2018 |
| Optimization of Electric Machine Designs - Part II. | 0 | 0.34 | 2018 |
| Optimization Of Electric Machine Designs-Part I | 0 | 0.34 | 2017 |
| Soft Magnetic Material Status and Trends in Electric Machines. | 3 | 0.55 | 2017 |
| Control of Shaft-Line-Embedded Multiphase Starter/Generator for Aero-Engine | 5 | 0.86 | 2016 |
| Theoretical analysis of the synchronous reactance influence on the speed regulation of PM motors | 0 | 0.34 | 2016 |
| Analysis, Optimization, and Prototyping of a Brushless DC Limited-Angle Torque-Motor with Segmented Rotor Pole Tip Structure | 7 | 0.77 | 2015 |
| New Trends in Electrical Machines Technology - Part I. | 1 | 0.37 | 2014 |
| High-Speed Electrical Machines and Drives. | 1 | 0.37 | 2014 |
| Test rig for induction motor quasi-static electromechanical characteristic determination | 0 | 0.34 | 2014 |
| Computational Algorithms For Induction-Motor Equivalent Circuit Parameter Determination-Part I: Resistances And Leakage Reactances | 15 | 1.58 | 2011 |
| Computational Algorithms for Induction Motor Equivalent Circuit Parameter Determination - Part II: Skin Effect and Magnetizing Characteristics. | 8 | 1.12 | 2011 |
| Estimation Of Iron Losses In Induction Motors: Calculation Method, Results, And Analysis | 21 | 1.88 | 2010 |
| Efficiency Analysis Of Pwm Inverter Fed Three-Phase And Dual Three-Phase High Frequency Induction Machines For Low/Medium Power Applications | 14 | 1.17 | 2008 |
| A General Model of the Laminated Steel Losses in Electric Motors with PWM Voltage Supply. | 2 | 0.67 | 2008 |
| Convection Heat Transfer and Flow Calculations Suitable for Electric Machines Thermal Models | 34 | 5.05 | 2008 |
| Iron Loss Prediction With PWM Supply Using Low- and High-Frequency Measurements: Analysis and Results Comparison | 17 | 2.65 | 2008 |
| Isolating the Impact of PWM Modulation on Motor Iron Losses. | 5 | 1.85 | 2008 |
| Factors Affecting Losses in Induction Motors with Non-Sinusoidal Supply | 4 | 1.06 | 2007 |
| Determination of Critical Parameters in Electrical Machine Thermal Models | 0 | 0.34 | 2007 |
