Abstract | ||
---|---|---|
The 3D reconstruction of scanning electron microscope (SEM) combining digital speckle correlation method (DSCM) and energy dispersive spectroscopy (EDS) were introduced to investigate the wear of cutting tool. The tool wear morphological analysis for flank wear and crater wear were carried out based on the SEM 3D reconstruction. The wear loss depth was detected by comparing the wear surface to its reference surface which was obtained by using least square method. An indentation with known 3D construction was used to vaLidate the calculating results, and the results were well consistent with the principle of constant volume. It is concluded that the SEM 3D reconstruction combining DSCM is reLiable on wear observation and presents great advantages in real engineering appLications. |
Year | DOI | Venue |
---|---|---|
2011 | 10.1109/ICDMA.2011.335 | ICDMA |
Keywords | Field | DocType |
constant volume,electron microscope,reference surface,wear observation,square method,wear loss depth,tool wear investigation,reconstruction technique,digital speckle correlation method,wear surface,crater wear,flank wear,3d reconstruction,image reconstruction,wear,scanning electron microscopy,sem,surface reconstruction,least square method,three dimensional,energy dispersive spectroscopy,scanning electron microscope,correlation,morphological analysis | Iterative reconstruction,Surface reconstruction,Indentation,Speckle pattern,Scanning electron microscope,Optics,Tool wear,Materials science,Cutting tool,3D reconstruction | Conference |
Citations | PageRank | References |
0 | 0.34 | 0 |
Authors | ||
5 |
Name | Order | Citations | PageRank |
---|---|---|---|
Liwen Zhang | 1 | 25 | 6.25 |
Derong Zhu | 2 | 1 | 0.72 |
Rui Wu | 3 | 0 | 0.34 |
Eiping Liu | 4 | 0 | 0.34 |
Danwen Zhang | 5 | 0 | 0.68 |