Name
Abstract | ||
|---|---|---|
Joining by forming of magnesium alloys is restricted by the limited forming capability of magnesium at room temperature. To
form acceptable joints without cracks usually heating of the parts to temperatures of 220�C or more is required. The application
of state-of-the-art joining by forming methods (such as self-pierce-riveting or clinching with a contoured die) implicates
pre-heating times of at least 3–6 s to achieve joints of acceptable quality. A new joining by forming technology, that is
working with a flat anvil as a counter tool instead of the contoured die shall be introduced in this paper. This new technology
is offering important advantages especially in joining Mg/Mg, Al/Mg or Fe/Mg connections, most remarkably being the reduction
of pre-heating times to less than 1 s, thus allowing for the fast and reliable joining of magnesium parts. Parameter influences
on the formation of the connections have been investigated and the values for the tensile strength have been determined for
a wide range of connections. |
Year | DOI | Venue |
|---|---|---|
2007 | 10.1007/s11740-007-0045-5 | Production Engineering |
Keywords | Field | DocType |
production processclinching � magnesium,tensile strength,magnesium,room temperature | Magnesium,Clinching,Scheduling (production processes),Metallurgy,Ultimate tensile strength,Engineering | Journal |
Volume | Issue | ISSN |
1 | 1 | 1863-7353 |
Citations | PageRank | References |
0 | 0.34 | 0 |
Authors | ||
4 | ||
Name | Order | Citations | PageRank |
|---|---|---|---|
| Reimund Neugebauer | 1 | 6 | 4.80 |
| Reinhard Mauermann | 2 | 0 | 0.34 |
| Stephan Dietrich | 3 | 0 | 0.34 |
| Christian Kraus | 4 | 0 | 0.34 |