Paper Info
Title
High-speed intermittent-contact mode scanning probe microscopy using cantilevers with integrated electrostatic actuator and thermoelectric sensor
Abstract
Integrated sensing and actuation are pivotal for making high-throughput scanning probe microscopy based devices where a large number of probes are employed for parallel operation. A thermoelectric sensor and an electrostatic-actuation platform fabricated on a cantilever can provide a simple way to integrate sensors and actuators on probes of these devices. The electrostatic actuation facilitates an intermittent-contact mode imaging method which can be implemented for parallel operation of cantilevers. It can improve the durability of these devices and the rate of signal amplitude-loss over time by significantly reducing tip wear. The speed of this method scales with the operating frequency of the cantilever because the imaging data is captured directly from the deflection signal at the oscillation frequency of the cantilever. Traditional intermittent-contact methods are slow, and can not be implemented on a large number of cantilevers because they rely on the demodulation of the cantilever-deflection signal. In the intermittent-contact mode imaging using electrostatic actuation, small-amplitude oscillation is employed for increased speed and reduced tip-sample force. However, significant tip-sample adhesion from soft materials, such as polymers and biological samples restricts the operating frequency of the small-amplitude oscillation and subsequently the throughout of the device. In this paper, an intermittent-contact mode scanning probe microscopy method using electrostatic actuation with input-shaping is presented which can overcome the limitations posed by the adhesive forces. Intermittent-contact operation at the resonant frequency of the cantilever and small cantilever-oscillation within the adhesive region can be achieved by this method. The thermoelectric sensor integrated on the cantilever provides an off-contact signal that can be used in a feedback manner to ensure reliable small-amplitude intermittent-contact mode operation.
Year
DOI
Venue
2009
10.1109/ACC.2009.5160608
ACC'09 Proceedings of the 2009 conference on American Control Conference
Keywords
DocType
ISSN
intermittent-contact mode,small-amplitude oscillation,intermittent-contact mode imaging,parallel operation,thermoelectric sensor,integrated electrostatic actuator,reliable small-amplitude intermittent-contact mode,operating frequency,electrostatic actuation,probe microscopy,large number,high-speed intermittent-contact mode,intermittent-contact mode imaging method,polymers,adhesives,oscillations,thermoelectricity,frequency,high throughput,resonant frequency,imaging,oscillators,demodulation,force,scanning probe microscopy
Conference
0743-1619
Citations 
PageRank 
References 
0
0.34
4
Authors
6
Name
Order
Citations
PageRank
D. R. Sahoo100.34
W. Häberle200.34
P. Bächtold3162.63
Sebastian, A.426744.35
H. Pozidis5607.52
Evangelos Eleftheriou61590118.20