Paper Info
Title
Measurement automation and result processing in timing analysis of a Linux-based CAN-to-CAN gateway
Abstract
The aim of this paper is to describe the method used to analyze timing properties of a Linux-based CAN-to-CAN gateway and to briefly present some of the analysis results. The considered gateway, implemented as an embedded system, can significantly simplify rapid prototyping of CAN-based distributed systems such as those used in automotive applications. The main interest was to measure the latencies induced by the gateway under the wide range of conditions such as various types of traffic, gateway configurations, additional system load and Linux kernel versions. The combinations of these conditions resulted in almost 400 different experiments and more than 600 graphs visualizing the results. A simple method to automate the experiments and to effectively draw conclusions from such a high number of experiments is proposed.
Year
DOI
Venue
2011
10.1109/IDAACS.2011.6072917
IDAACS), 2011 IEEE 6th International Conference
Keywords
DocType
Volume
Linux,automobile industry,controller area networks,internetworking,rapid prototyping (industrial),CAN-based distributed systems,Linux-based CAN-to-CAN gateway,automotive applications,embedded system,measurement automation,rapid prototyping,result processing,timing analysis,CAN bus,Linux,ScketCAN,analysis,gateway
Conference
2
ISBN
Citations 
PageRank 
978-1-4577-1426-9
2
0.38
References 
Authors
0
4
Name
Order
Citations
PageRank
Michal Sojka194.13
Pavel Písa220.72
Ondrej Špinka3161.63
hanzalek zdeněk410122.42