Abstract | ||
---|---|---|
In this paper, a general lumped circuit modeling method is proposed to describe the conducted electromagnetic interference (EMI) coupling mechanism for the switching power converters. The EMI characteristics of the converters can be analytically deduced from a circuit theoretical viewpoint. The shunt and series impedance insertion method is introduced to identify the differential-mode (DM) and common-mode (CM) noise impedances and voltage sources. The procedure of parameters estimation for the noise models comprises several simple measurements and is convenient to be implemented. Experimental illustrations are also included to verify the validity of the proposed method. Comparison between the measured and predicted results shows that the EMI modeling method can provide adequate prediction of the EMI feature for power-switching converters |
Year | DOI | Venue |
---|---|---|
2006 | 10.1109/TIE.2006.885129 | IEEE Transactions on Industrial Electronics |
Keywords | Field | DocType |
Circuit noise,Electromagnetic interference,Switching converters,Impedance,Electromagnetic modeling,Coupling circuits,Electromagnetic coupling,Switching circuits,Delta modulation,Voltage | Coupling,Conducted electromagnetic interference,Control theory,Voltage source,Electromagnetic interference,Control engineering,Electrical impedance,Converters,Electronic engineering,Engineering,Estimation theory,EMI | Journal |
Volume | Issue | ISSN |
53 | 6 | 0278-0046 |
Citations | PageRank | References |
7 | 2.18 | 1 |
Authors | ||
5 |
Name | Order | Citations | PageRank |
---|---|---|---|
Jin Meng | 1 | 7 | 2.18 |
Weiming Ma | 2 | 16 | 3.59 |
Qijun Pan | 3 | 7 | 2.18 |
Zhihua Zhao | 4 | 12 | 2.62 |
Lei Zhang | 5 | 7 | 2.52 |