Paper Info
Title
Finite Element Analysis And Design Improvement Of Film Picking Forks Roller Tooth In Field Cleaning Machine
Abstract
In this paper the mechanical analysis of the film picking forks roller tooth in field -cleaning machine was done. A finite element analysis model was built and used by the non-linear finite element analysis method. It is obtained from the result of post-processing calculation and analysis that according to the Fourth Strength Theory, the maximum equivalent stress on the pole tooth root under the uniform load. Root strength should be strengthened to ensure the evenly stress overall the pole tooth, because pole tooth root department would be deformed easily. And the largest stress is at the end of pole tooth and decreases gradually from end to root, and deformation is also the same. Based on the analysis of strength and rigidity, the bearing forces and deformation of the film picking forks roller tooth in work were predicted and validated. It was found that the finite element analysis and the result of test were well coincided. The reliable tool was provided for the design of the film picking forks roller tooth by the finite element analysis. The Roller tooth was designed and improved according to the requirement of deformation and operation.
Year
DOI
Venue
2011
10.1007/978-3-642-27275-2_58
COMPUTER AND COMPUTING TECHNOLOGIES IN AGRICULTURE V, PT III
Keywords
DocType
Volume
Field Cleaning Machine, Film Picking Forks Roller Tooth, Non-linear Finite Element
Conference
370
Issue
ISSN
Citations 
PART 3
1868-4238
0
PageRank 
References 
Authors
0.34
0
6
Name
Order
Citations
PageRank
Xufeng Wang1223.86
Yonghua Sun253.52
Shaohui Ma301.01
Wei Wang420258.31
Jun-Gang Wang541.88
zhang xuejun600.68