Abstract | ||
---|---|---|
We have examined the improvement of filter properties using sapphire and nickel rod trimmers. We measured the resonance frequency of the hairpin resonator in the filter, and examined the difference between the simulated and measured values. When the measured resonance frequency was lower than the simulated frequency, we used a nickel trimmer to increase the resonance frequency, and when high, a sapphire trimmer to decrease the frequency. Our results showed that the use of sapphire and nickel rod trimmers is effective in improving the frequency response of HTS bandpass filters. |
Year | DOI | Venue |
---|---|---|
2006 | 10.1093/ietele/e89-c.2.119 | IEICE TRANSACTIONS ON ELECTRONICS |
Keywords | Field | DocType |
HTS filter, trimming, IMT-2000, YBCO thin film | Frequency response,High-temperature superconductivity,Band-pass filter,Resonator,Optics,Electronic engineering,Nickel,Engineering,Sapphire,Resonance,Trimmer | Journal |
Volume | Issue | ISSN |
E89C | 2 | 0916-8524 |
Citations | PageRank | References |
1 | 0.63 | 0 |
Authors | ||
6 |
Name | Order | Citations | PageRank |
---|---|---|---|
Fumihiro Aita | 1 | 1 | 0.63 |
Naoto Sekiya | 2 | 1 | 1.64 |
Satoshi Ono | 3 | 219 | 39.83 |
Atsushi Saito | 4 | 1 | 0.96 |
Satoru Hirano | 5 | 1 | 0.63 |
shigetoshi | 6 | 10 | 11.48 |