Abstract | ||
---|---|---|
A spatial-mode multiplexer/demultiplexer using a Bragg reflector tapered hollow waveguide is proposed. Depending on each spatial mode, vertical radiation takes place at a cut-off condition while the radiation position is dependent on the order of each spatial mode. Modeling of our structure is carried out by using a mode-matching method. The result shows low wavelength dependence and no noticeable polarization dependence while a low insertion loss is expected. Also a tapered hollow waveguide consisting of highly reflective multilayer mirrors with a wafer bonding process is fabricated. Clear vertical radiation could be observed, depending on the order of spatial modes. Our proposed device enables us to integrate surface-normal optical devices such as photo-detectors and VCSELs. The device will be useful for ultra-high capacity optical interconnects using spatial mode multiplexing. |
Year | DOI | Venue |
---|---|---|
2011 | 10.1587/elex.8.684 | IEICE ELECTRONICS EXPRESS |
Keywords | DocType | Volume |
multiplexer/demultiplexer, hollow waveguide, spatial mode | Journal | 8 |
Issue | ISSN | Citations |
9 | 1349-2543 | 0 |
PageRank | References | Authors |
0.34 | 0 | 3 |
Name | Order | Citations | PageRank |
---|---|---|---|
Hamed Dalir | 1 | 0 | 1.01 |
Yasushi Yokota | 2 | 0 | 0.34 |
Fumio Koyama | 3 | 4 | 7.57 |