Paper Info
Title
Capacitance Reduction With An Optimized Converter Connection Applied to LED Drivers
Abstract
This paper presents a new control method and a detailed project methodology for the optimized connection method of two converters, aiming to reduce the redundant power processing, in order to supply high-power light-emitting diodes (LEDs) with reduced capacitance and high efficiency, directly from the ac line. This connection method allows dealing with two major issues related to the LED driver: capacitance reduction and efficiency increasing. The first converter provides power factor correction, whereas the second converter controls the current through the LED. The basic idea consists in making the second converter to process only the low-frequency ripple (LFR) of the first converter, thus smoothing the LED current. In this way, the LFR is managed by the second stage, so that the capacitance of the first stage can be significantly reduced. The proposed control method can achieve better results for the low-frequency compensation. In addition to that, a high power factor and a low harmonic content are obtained, fulfilling the IEC 61000-3-2 Class C requirements. A laboratory prototype with a rated power of 75 W and an input voltage of 220 Vrms/60 Hz was built in order to show the feasibility of the idea. The measured overall efficiency of the converter was 91%, and electrolytic capacitors were avoided.
Year
DOI
Venue
2015
10.1109/TIE.2014.2327591
Industrial Electronics, IEEE Transactions  
Keywords
DocType
Volume
Light emitting diodes,Capacitors,Mathematical model,Capacitance,Topology,Voltage control,Power generation
Journal
62
Issue
ISSN
Citations 
1
0278-0046
9
PageRank 
References 
Authors
1.00
13
8
Name
Order
Citations
PageRank
Douglas Camponogara191.00
Ribeiro Vargas, D.291.00
Dalla Costa, M.A.37513.30
J. Marcos Alonso491.34
Diogo Ribeiro Vargas591.00
Marco Antonio Dalla Costa6102.06
Jorge García7569.36
Tiago B. Marchesan891.00