Abstract | ||
---|---|---|
In this paper an integrated CMOS front-end circuit for a micro-integrated fluxgate magnetometer is proposed. The system is based on excitation block, that feeds the excitation coil of the sensor and a read-out block that sense the voltage of the pick-up coils. To sense the output signal, the second harmonic detection principle has been chosen to achieve a good compromise between power consumption and noise requirements. An integrated low pass Sallen-Key filter has been used to extract the dc signal after the demodulation. The preliminary measurements, performed with a PCB sensor, show a sensitivity of 920 V/T and a linearity error of 6% full scale. The circuit has been realized in a standard 0.35 mum CMOS process. The power consumption is 8 mW @ 3.3V for the excitation and read-out parts and unit and 42 mW @ 5V for the output power stage |
Year | DOI | Venue |
---|---|---|
2006 | 10.1109/ISCAS.2006.1693605 | Island of Kos |
Keywords | Field | DocType |
CMOS integrated circuits,fluxgate magnetometers,low-pass filters,magnetic sensors,printed circuits,0.35 micron,3.3 V,42 mW,5 V,8 mW,CMOS front-end circuit,PCB sensor,Sallen-Key filter,excitation block,excitation coil,integrated fluxgate magnetic sensors,low pass filter,microintegrated fluxgate magnetometer,pick-up coils,read-out block,second harmonic detection principle | Front and back ends,Demodulation,Computer science,Fluxgate compass,Voltage,Harmonic,CMOS,Electronic engineering,Low-pass filter,Electrical engineering,Sallen–Key topology | Conference |
ISSN | ISBN | Citations |
0271-4302 | 0-7803-9389-9 | 0 |
PageRank | References | Authors |
0.34 | 0 | 4 |
Name | Order | Citations | PageRank |
---|---|---|---|
A. Baschirotto | 1 | 176 | 54.55 |
Borghetti, F. | 2 | 14 | 3.44 |
E. Dallago | 3 | 36 | 9.47 |
piero malcovati | 4 | 138 | 28.99 |