Paper Info
Title
Optimizing the thermal read-out technique for MIP-based biomimetic sensors: towards nanomolar detection limits.
Abstract
In previous work, the novel heat-transfer method (HTM) for the detection of small molecules with Molecularly Imprinted Polymers (MIP)-type receptors was presented. In this study we focus on optimization of this sensor performance, with as final aim to lower the detection limit by reducing the noise level. It was determined that the noise originates foremost from the power supply, which can be controlled by varying the PID parameters. Therefore, the effect of the individual parameters was evaluated by tuning P, I and D separately at a temperature of 37 degrees C, giving a first indication of the optimal configuration. Next, a temperature profile was programmed and the standard deviation of the heat-transfer resistance over the entire regime was studied for a set of parameters. The optimal configuration, P1-I6-D0, reduced the noise level with nearly a factor of three compared to the original parameters of P10-I5-D0. With the optimized settings, the detection of L-nicotine in buffer solutions was studied and the detection limit improved significantly from 100 nM to 35 nM. Summarizing, optimization of the PID parameters and thereby improving the detection limit is a key parameter for first applications of the HTM-method for MIP receptors in analytical research.
Year
DOI
Venue
2013
10.3390/s130709148
SENSORS
Keywords
Field
DocType
heat-transfer method (HTM),molecularly imprinted polymers (MIPs),L-nicotine,PID parameters
Detection limit,Transducer,Molecularly imprinted polymer,Analytical chemistry,Thermal,PID controller,Biomimetics,Engineering,Molecular imprinting,Standard deviation
Journal
Volume
Issue
ISSN
13
7.0
1424-8220
Citations 
PageRank 
References 
2
0.79
0
Authors
6
Name
Order
Citations
PageRank
Bram Geerets120.79
Marloes Peeters241.30
Bart van Grinsven342.31
Karolien Bers420.79
Ward de Ceuninck541.64
Patrick Wagner641.64