Title | ||
---|---|---|
A −19dBm sensitivity integrated RF-DC converter with regulated output voltage for powering UHF wireless sensors |
Abstract | ||
---|---|---|
This paper presents a -19dBm sensitivity RF-DC converter for energy harvesting applications. It is able to harvest the energy from a dipole antenna operating at 866.5MHz (European UHF RFID frequency) providing a regulated output voltage in the range between 1.9V to 2.4V over a 2MΩ resistive load. Such voltage level is suitable to supply body sensor nodes. The four stages Dickson's RF-DC rectifier converts the UHF RF input signal to a 2V DC output, feeding the following two stages DC-DC Pelliconi's charge pump. The DC-DC charge pump, powered by a 90kHz ring oscillator, is used to further step-up the RF-DC rectifier output voltage and to realize the RF to load isolation. The output voltage regulation is performed by a feedback network made by a hysteresis comparator and a Vt-based voltage reference. The RF-DC converter shows a 38% power conversion efficiency at 0dbm input power level. |
Year | DOI | Venue |
---|---|---|
2015 | 10.1109/IWASI.2015.7184926 | 2015 6th International Workshop on Advances in Sensors and Interfaces (IWASI) |
Keywords | Field | DocType |
Body Sensor Nodes,Charge Pump,Energy Harvesting,RFID | Ring oscillator,Rectifier,Capacitance,Voltage,Voltage reference,Forward converter,Electronic engineering,Voltage regulation,Charge pump,Engineering,Electrical engineering | Conference |
Citations | PageRank | References |
0 | 0.34 | 3 |
Authors | ||
7 |
Name | Order | Citations | PageRank |
---|---|---|---|
Mirko Pasca | 1 | 3 | 2.25 |
Stefano D'Amico | 2 | 129 | 27.42 |
V. Chironi | 3 | 15 | 3.96 |
Luca Catarinucci | 4 | 230 | 23.95 |
Danilo De Donno | 5 | 211 | 16.09 |
Riccardo Colella | 6 | 78 | 11.93 |
Luciano Tarricone | 7 | 280 | 31.43 |