Paper Info
Title
Resonant characteristics of metal rod resonator supported by PEEK material at 60 GHz
Abstract
From the viewpoints of cost-effectiveness and fabrication accuracy, the self-injection locked NRD guide Gunn oscillator using a metal rod resonator was investigated at 60GHz, where the supporting method for the metal rod resonator hasn't been established. With this in mind, the metal rod resonator supported by the dielectric pieces which have a high mechanical strength and an easily fabrication was examined in this paper. First, the resonant characteristics of the PEEK (Polyether-ether-ketone) materials to use as the dielectric pieces were measured. Next, the eigenvalues of the PEEK resonator were calculated, and then the dielectric constants of the PEEK were estimated at nearly 60GHz. Finally, the lowest mode and the first higher mode resonators supported by the PEEK were designed and the resonant characteristics were calculated.
Year
DOI
Venue
2015
10.1109/RWS.2015.7129741
RWS
Keywords
Field
DocType
PEEK (Polyether-ether-ketone) materials, metal rod resonators, self-injection locked techniques, NRD guide, millimeter-waves
Mechanical strength,Dielectric,Resonator,Electronic engineering,Gunn diode,Dielectric resonator antenna,Metal,Optoelectronics,Materials science,Fabrication,Peek
Conference
ISSN
Citations 
PageRank 
2164-2958
0
0.34
References 
Authors
0
2
Name
Order
Citations
PageRank
Futoshi Kuroki105.07
Makoto Teramoto200.34