Name
Abstract | ||
|---|---|---|
Gravimeters are used to measure density anomalies under the ground. They are applied in many different fields from volcanology to oil and gas exploration, but present commercial systems are costly and massive. A new type of gravity sensor has been developed that utilises the same fabrication methods as those used to make mobile phone accelerometers. In this study, we describe the first results of a field-portable microelectromechanical system (MEMS) gravimeter. The stability of the gravimeter is demonstrated through undertaking a multi-day measurement with a standard deviation of 5.58 10(-6) ms(-2). It is then demonstrated that a change in gravitational acceleration of 4.5 x 10(-5) ms(-2) can be measured as the device is moved between the top and the bottom of a 20.7 m lift shaft with a signal-to-noise ratio (SNR) of 14.25. Finally, the device is demonstrated to be stable in a more harsh environment: a 4.5x10(-4) ms(-2) gravity variation is measured between the top and bottom of a 275-m hill with an SNR of 15.88. These initial field-tests are an important step towards a chip-sized gravity sensor. |
Year | DOI | Venue |
|---|---|---|
2017 | 10.3390/s17112571 | SENSORS |
Keywords | Field | DocType |
gravity,gravimeter,gravimetry,MEMS | Gravitational acceleration,Lift (force),Microelectromechanical systems,Accelerometer,Remote sensing,Gravimeter,Electronic engineering,Gravimetry,Acoustics,Standard deviation,Fabrication,Physics | Journal |
Volume | Issue | ISSN |
17 | 11.0 | 1424-8220 |
Citations | PageRank | References |
1 | 0.38 | 1 |
Authors | ||
7 | ||
Name | Order | Citations | PageRank |
|---|---|---|---|
| Richard P. Middlemiss | 1 | 1 | 0.38 |
| Steven G. Bramsiepe | 2 | 1 | 0.38 |
| Rebecca Douglas | 3 | 1 | 0.38 |
| James Hough | 4 | 1 | 0.38 |
| Douglas J. Paul | 5 | 1 | 0.38 |
| Sheila Rowan | 6 | 1 | 0.38 |
| Giles D. Hammond | 7 | 1 | 0.38 |