Title
Design, Fabrication, and Evaluation of Multifocal Point Transducer for High-Frequency Ultrasound Applications.
Abstract
The present study illustrates the design, fabrication, and evaluation of a novel multifocal point (MFP) transducer based on polyvinylidene fluoride (PVDF) film for high-frequency ultrasound application. The fabricated MFP surface was press-focused using a computer numerical control (CNC) machining tool-customized multi-spherical pattern object. The multi-spherical pattern has five spherical surfaces with equal area and connected continuously to have the same energy level at focal points. Center points of these spheres are distributed in a linear pattern with 1 mm distance between each two points. The radius of these spheres increases steadily from 10 mm to 13.86 mm. The designed MFP transducer had a center frequency of 50 MHz and a -6 dB bandwidth of 68%. The wire phantom test was conducted to study and demonstrate the advantages of this novel design. The obtained results for MFP transducer revealed a significant increase (4.3 mm) of total focal zone in the near-field and far-field area compared with 0.48 mm obtained using the conventional single focal point transducer. Hence, the proposed method is promising to fabricate MFP transducers for deeper imaging depth applications.
Year
DOI
Venue
2019
10.3390/s19030609
SENSORS
Keywords
Field
DocType
ultrasonic transducer,multifocal point transducer,high-frequency applications,high-frequency ultrasound transducer,PVDF focused transducer
Transducer,Ultrasonic sensor,Focal point,Cardinal point,Imaging phantom,Machining,Electronic engineering,Center frequency,Acoustics,Engineering,Fabrication
Journal
Volume
Issue
ISSN
19
3.0
1424-8220
Citations 
PageRank 
References 
0
0.34
4
Authors
10