Title | ||
---|---|---|
Stable Aqueous Solution for the Fabrication of α-Fe2O3 Thin Film-Based Chemoresistive Sensors. |
Abstract | ||
---|---|---|
In this paper, stable water solution using a Pechini sol-gel process was prepared. The solution was used for the direct printing of iron oxide precursor on alumina substrates. To convert the precursor to the desired iron oxide phase, an annealing step was carried out at elevated temperatures (> 450 degrees C). In this work a alpha-Fe2O3 thin film-based chemoresistive sensors for ethanol detection in air were fabricated. The device developed was investigated for evaluate the sensing characteristics such sensitivity, selectivity and stability. |
Year | DOI | Venue |
---|---|---|
2016 | 10.1007/978-3-319-55077-0_13 | Lecture Notes in Electrical Engineering |
Keywords | DocType | Volume |
Iron oxide,Thin films,Ethanol sensors | Conference | 431 |
ISSN | Citations | PageRank |
1876-1100 | 0 | 0.34 |
References | Authors | |
0 | 5 |
Name | Order | Citations | PageRank |
---|---|---|---|
A. Mirzaei | 1 | 0 | 0.34 |
M. Bonyani | 2 | 0 | 0.34 |
Salvatore Gianluca Leonardi | 3 | 0 | 0.68 |
nicola donato | 4 | 5 | 8.47 |
Giovanni Neri | 5 | 0 | 2.70 |