Paper Info
Title
Testing System for the Mechanical Properties of Small-Scale Specimens Based on 3D Microscopic Digital Image Correlation.
Abstract
The testing of the mechanical properties of materials on a small scale is difficult because of the small specimen size and the difficulty of measuring the full-field strain. To tackle this problem, a testing system for investigating the mechanical properties of small-scale specimens based on the three-dimensional (3D) microscopic digital image correlation (DIC) combined with a micro tensile machine is proposed. Firstly, the testing system is described in detail, including the design of the micro tensile machine and the 3D microscopic DIC method. Then, the effects of different shape functions on the matching accuracy obtained by the inverse compositional Gauss-Newton (IC-GN) algorithm are investigated and the numerical experiment results verify that the error due to under matched shape functions is far larger than that of overmatched shape functions. The reprojection error is shown to be smaller than before when employing the modified iteratively weighted radial alignment constraint method. Both displacement and uniaxial measurements were performed to demonstrate the 3D microscopic DIC method and the testing system built. The experimental results confirm that the testing system built can accurately measure the full-field strain and mechanical properties of small-scale specimens.
Year
DOI
Venue
2020
10.3390/s20123530
SENSORS
Keywords
DocType
Volume
stereo light microscope,camera calibration,shape function,undermatching and overmatching,digital image correlation,micro tensile machine
Journal
20
Issue
ISSN
Citations 
12
1424-8220
0
PageRank 
References 
Authors
0.34
0
2
Name
Order
Citations
PageRank
X.L. Liu11111.83
Rongsheng Lu201.35