Title
Online Frequency Response Analysis of Electric Machinery through an Active Coupling System Based on Power Electronics
Abstract
This paper presents an innovative concept for the online application of Frequency Response Analysis (FRA). FRA is a well known technique that is applied to detect damage in electric machinery. As an offline technique, the machine under testing has to be removed from service-which may cause loss of production. Experimental adaptations of FRA to online operation are usually based on the use of passive high pass coupling-which, ideally, should provide attenuation to the grid voltage, and at the same time, allow the high frequency FRA signals to be injected at the machine. In practice, however, the passive coupling results in a trade-off between the required attenuation and the useful area obtained at the FRA spectra. This paper proposes the use of an active coupling system, based on power electronics, in order to cancel the grid voltage at the terminals of FRA equipment and allow its safe connection to an energized machine. The paper presents the basic concepts of FRA and the issue of online measurements. It also presents basic concepts about power electronics converters and the operating principles of the Modular Multilevel Converter, which enables the generation of an output voltage with low THD, which is important for tracking the grid voltage with minimum error.
Year
DOI
Venue
2021
10.3390/s21238057
SENSORS
Keywords
DocType
Volume
condition based monitoring, failure diagnosis, electric machinery, frequency response analysis, modular multilevel converters, power electronics, predictive maintenance
Journal
21
Issue
ISSN
Citations 
23
1424-8220
0
PageRank 
References 
Authors
0.34
0
10