| The New Era of Long-Range "Zero-Interception" Ambient Backscattering Systems: 130 m with 130 nA Front-End Consumption | 0 | 0.34 | 2022 |
| The New Era of Long-Range "Zero-Interception" Ambient Backscattering Systems: 130 m with 130 nA Front-End Consumption | 0 | 0.34 | 2022 |
| Energy-Efficient Harmonic Transponder Based on On-Off Keying Modulation for Both Identification and Sensing | 1 | 0.48 | 2022 |
| Advances in Wirelessly Powered Backscatter Communications: From Antenna/RF Circuitry Design to Printed Flexible Electronics | 0 | 0.34 | 2022 |
| Holography-Based Target Localization and Health Monitoring Technique Using UHF Tags Array | 0 | 0.34 | 2021 |
| Triple-Band Single-Layer Rectenna For Outdoor Rf Energy Harvesting Applications | 1 | 0.39 | 2021 |
| A Bidirectional Absorptive Common-Mode Filter Based on Interdigitated Microstrip Coupled Lines for 5G "Green" Communications. | 0 | 0.34 | 2020 |
| A Novel Compact Isolation Circuit Suitable For Ultracompact And Wideband Marchand Baluns | 0 | 0.34 | 2020 |
| 3D-Printed Omnidirectional Luneburg Lens Retroreflectors for Low-Cost mm-Wave Positioning | 0 | 0.34 | 2020 |
| Ultra-Compact and Wideband V(U)HF 3-dB Power Dividers Consisting of Novel Asymmetric Impedance Transformers. | 0 | 0.34 | 2019 |
| Bi-Directional Loop Antenna Array Using Magic Cube Origami. | 0 | 0.34 | 2019 |
| Guest Editorial Special Issue on Intrinsic Hardware Security for Internet of Things Infrastructure. | 0 | 0.34 | 2019 |
| Hybrid Printed Energy Harvesting Technology for Self-Sustainable Autonomous Sensor Application. | 1 | 0.37 | 2019 |
| Compact and Wideband General Coupled-Line Ring Hybrids (GCRHs) for Arbitrary Circumferences and Arbitrary Power-Division Ratios. | 0 | 0.34 | 2019 |
| Complex Impedance Transformers Based on Allowed and Forbidden Regions. | 0 | 0.34 | 2019 |
| In-Phase T-Junction: Study and Application to Gysel Power Dividers for High Power-Division Ratios Requiring No High-Impedance Transmission-Line Section. | 0 | 0.34 | 2019 |
| Design of Inkjet-Printed RFID-Based Sensor on Paper: Single- and Dual-Tag Sensor Topologies. | 0 | 0.34 | 2018 |
| A Novel Wideband Compact Microstrip Coupled-Line Ring Hybrid for Arbitrarily High Power-Division Ratios. | 0 | 0.34 | 2017 |
| Smart Test Strips: Next-Generation Inkjet-Printed Wireless Comprehensive Liquid Sensing Platforms. | 0 | 0.34 | 2017 |
| Additively Manufactured RF Components and Modules: Toward Empowering the Birth of Cost-Efficient Dense and Ubiquitous IoT Implementations. | 0 | 0.34 | 2017 |
| Additive manufacturing technologies for near-and far-field energy harvesting applications | 0 | 0.34 | 2016 |
| A novel wideband and circularly polarized cross-dipole antenna. | 0 | 0.34 | 2016 |
| Additively Manufactured Nanotechnology and Origami-Enabled Flexible Microwave Electronics | 3 | 0.98 | 2015 |
| Ambient RF Energy-Harvesting Technologies for Self-Sustainable Standalone Wireless Sensor Platforms | 58 | 1.97 | 2014 |
| Solar/Electromagnetic Energy Harvesting and Wireless Power Transmission | 3 | 0.55 | 2014 |
| Energy Harvesting and Scavenging [Scanning the Issue] | 6 | 0.46 | 2014 |
| Optimized design of multiband and solar rectennas | 0 | 0.34 | 2014 |
| RF tag front-end design for uncompromised communication and harvesting | 1 | 0.38 | 2014 |
| A fully inkjet-printed chipless RFID gas and temperature sensor on paper | 0 | 0.34 | 2014 |
| Effect of feeder cable's phase tolerance on the first sidelobe level of base station antenna | 0 | 0.34 | 2014 |
| Power harvesting from microwave oven electromagnetic leakage | 10 | 1.08 | 2013 |
| Wireless sensing and identification based on radar cross section variability measurement of passive electromagnetic sensors. | 2 | 0.58 | 2013 |
| Automated Identification of Plywood Using Embedded Inkjet-Printed Passive UHF RFID Tags | 3 | 0.65 | 2013 |
| Short-term power load forecasting using grey correlation contest modeling | 10 | 0.67 | 2012 |
| SenSprout: inkjet-printed soil moisture and leaf wetness sensor | 6 | 1.20 | 2012 |
| A 927 MHz solar powered active antenna oscillator beacon signal generator | 0 | 0.34 | 2012 |
| Wireless sensing and identification of passive electromagnetic sensors based on millimetre-wave FMCW RADAR. | 1 | 0.38 | 2012 |
| Inkjet-printed monopole antennas for enhanced-range WBAN and wearable biomonitoring application | 1 | 0.40 | 2012 |
| Multipacket reception MAC schemes for the RFID EPC Gen2 protocol. | 2 | 0.41 | 2012 |
| A New Power-Consumption Optimization Technique For Two-Stage Operational Amplifiers | 0 | 0.34 | 2011 |
| Progress Towards the First Wireless Sensor Networks Consisting of Inkjet-Printed, Paper-Based RFID-Enabled Sensor Tags | 21 | 2.77 | 2010 |
| Robust Passive Beamformer Using Bridge Function Sequences As Weights | 0 | 0.34 | 2009 |
| Conductive Inkjet-Printed Wireless Sensor Nodes on Flexible Low-Cost Paper-Based Substrates | 0 | 0.34 | 2008 |
| Novel Energy Harvesting Technologies for ICT Applications | 4 | 2.24 | 2008 |
| Development of Multi-Broadband Planar Wire Antennas for Wireless Applications | 3 | 0.66 | 2007 |
| Antenna Advancement Techniques And Integration Of Rfid Electronics On Organic Substrates For Uhf Rfid Applications In Automotive Sensing And Vehicle Security | 1 | 0.43 | 2007 |
