| Fast update of sliced voxel workpiece models using partitioned swept volumes of three-axis linear tool paths | 0 | 0.34 | 2020 |
| A decision-support method for information inconsistency resolution in direct modeling of CAD models | 1 | 0.36 | 2019 |
| Push-pull direct CAD modeling with movable neighboring faces for preserving G^1 connections. | 0 | 0.34 | 2019 |
| On Limitations of the Witness Configuration Method for Geometric Constraint Solving in CAD Modeling. | 0 | 0.34 | 2019 |
| Variational B-rep Model Analysis for Direct Modeling using Geometric Perturbation. | 0 | 0.34 | 2019 |
| Push-pull direct modeling of solid CAD models. | 2 | 0.40 | 2019 |
| Establishing a balanced neighborhood of discrete points for local quadric surface fitting. | 0 | 0.34 | 2017 |
| Extracting Sectional Contours From Scanned Point Clouds Via Adaptive Surface Projection | 0 | 0.34 | 2017 |
| Cutter-workpiece engagement determination for general milling using triangle mesh modeling. | 1 | 0.36 | 2016 |
| Outlier detection for scanned point clouds using majority voting | 6 | 0.52 | 2015 |
| Preferred feed direction field: A new tool path generation method for efficient sculptured surface machining | 4 | 0.45 | 2015 |
| An adaptive normal estimation method for scanned point clouds with sharp features | 9 | 0.48 | 2013 |
| An accurate and efficient algorithm for determining minimum circumscribed circles and spheres from discrete data points | 2 | 0.45 | 2013 |
| Process planning for Floor machining of 2½D pockets based on a morphed spiral tool path pattern | 7 | 0.71 | 2012 |
| Web-DPP: towards job-shop machining process planning and monitoring. | 2 | 0.45 | 2011 |
| Reconstruction of 2D polygonal curves and 3D triangular surfaces via clustering of Delaunay circles/spheres | 2 | 0.40 | 2011 |
| A hybrid approach for dynamic assembly shop floor layout | 4 | 0.45 | 2010 |
| Delaunay-based triangular surface reconstruction from points via Umbrella Facet Matching | 0 | 0.34 | 2010 |
| Design and simulation of an adaptive and collaborative assembly cell | 2 | 0.51 | 2010 |
| ASP: An Adaptive Setup Planning Approach for Dynamic Machine Assignments | 11 | 0.71 | 2010 |
| Function Blocks Enabled Dynamic Set-Up Dispatching And Execution Monitoring | 2 | 0.40 | 2009 |
| A global clustering approach to point cloud simplification with a specified data reduction ratio | 13 | 0.60 | 2008 |
| Automatic Detection of Tangential Discontinuities in Point Cloud Data | 1 | 0.35 | 2008 |
| Point-cloud simplification with bounded geometric deviations | 1 | 0.35 | 2007 |
| On the B-spline interpolated tool trajectories for five-axis sculptured surface machining | 2 | 0.40 | 2006 |
| Iso-planar piecewise linear NC tool path generation from discrete measured data points | 12 | 0.74 | 2005 |
| On the normal vector estimation for point cloud data from smooth surfaces | 38 | 1.89 | 2005 |
| Minimum-Zone Form Tolerance Evaluation Using Rigid-Body Coordinate Transformation | 2 | 0.51 | 2003 |
| Constant scallop-height tool path generation for three-axis sculptured surface machining | 28 | 1.65 | 2002 |
