Abstract | ||
---|---|---|
This paper describes an 18-GHz coupled VCO array for low jitter and low phase deviation clock distribution. To reduce the skew, jitter and power consumption associated with clock distribution, the clock is generated by a one-dimensional VCO array in which the oscillating nodes of adjacent VCOs are directly connected with wires. The effects of the wire length and number of unit VCOs in the array are discussed. Both 4-unit and a 2-unit VCO arrays for delivering a clock signal to a 16:1 multiplexor were designed and fabricated in a 90-nm CMOS process. The frequency range of the 4-unit VCO array was 16 GHz to 18.5 GHz while each unit VCO consumed 2 mA. |
Year | DOI | Venue |
---|---|---|
2007 | 10.1093/ietele/e90-c.4.811 | IEICE TRANSACTIONS ON ELECTRONICS |
Keywords | Field | DocType |
high-speed I/O, clock distribution, oscillators, injection locking, voltage-controlled oscillator | Clock signal,Injection locking,Voltage-controlled oscillator,Multiplexer,Electronic engineering,Skew,Jitter,Engineering,Electrical engineering,Gigue,Power consumption | Journal |
Volume | Issue | ISSN |
E90C | 4 | 1745-1353 |
Citations | PageRank | References |
2 | 0.44 | 5 |
Authors | ||
6 |
Name | Order | Citations | PageRank |
---|---|---|---|
Takayuki Shibasaki | 1 | 66 | 12.00 |
Hirotaka Tamura | 2 | 204 | 32.19 |
Kouichi Kanda | 3 | 56 | 7.86 |
Hisakatsu Yamaguchi | 4 | 64 | 10.20 |
Junji Ogawa | 5 | 100 | 12.63 |
Tadahiro Kuroda | 6 | 659 | 213.23 |