Name
Title | ||
|---|---|---|
An infrastructure for accurate characterization of single-event transients in digital circuits |
Abstract | ||
|---|---|---|
We present the architecture and a detailed pre-fabrication analysis of a digital measurement ASIC facilitating long-term irradiation experiments of basic asynchronous circuits, which also demonstrates the suitability of the general approach for obtaining accurate radiation failure models developed in our FATAL project. Our ASIC design combines radiation targets like Muller C-elements and elastic pipelines as well as standard combinational gates and flip-flops with an elaborate on-chip measurement infrastructure. Major architectural challenges result from the fact that the latter must operate reliably under the same radiation conditions the target circuits are exposed to, without wasting precious die area for a rad-hard design. A measurement architecture based on multiple non-rad-hard counters is used, which we show to be resilient against double faults, as well as many triple and even higher-multiplicity faults. The design evaluation is done by means of comprehensive fault injection experiments, which are based on detailed Spice models of the target circuits in conjunction with a standard double-exponential current injection model for single-event transients (SET). To be as accurate as possible, the parameters of this current model have been aligned with results obtained from 3D device simulation models, which have in turn been validated and calibrated using micro-beam radiation experiments at the GSI in Darmstadt, Germany. For the latter, target circuits instrumented with high-speed sense amplifiers have been used for analog SET recording. Together with a probabilistic analysis of the sustainable particle flow rates, based on a detailed area analysis and experimental cross-section data, we can conclude that the proposed architecture will indeed sustain significant target hit rates, without exceeding the resilience bound of the measurement infrastructure. |
Year | DOI | Venue |
|---|---|---|
2013 | 10.1016/j.micpro.2013.04.011 | Microprocessors and Microsystems - Embedded Hardware Design |
Keywords | Field | DocType |
Asynchronous digital design,Radiation fault-tolerance,Single-event transients,Single-event upsets,LFSR counters,Elastic pipelines,Muller C-elements,TCAD models,Spice models,SET injection experiments,Ion beam radiation | Asynchronous communication,Digital electronics,Computer science,Spice,Parallel computing,Probabilistic analysis of algorithms,Application-specific integrated circuit,Electronic circuit,Fault injection,Amplifier | Journal |
Volume | Issue | ISSN |
37 | 8 | 0141-9331 |
Citations | PageRank | References |
8 | 0.80 | 37 |
Authors | ||
12 | ||
Name | Order | Citations | PageRank |
|---|---|---|---|
| Varadan Savulimedu Veeravalli | 1 | 13 | 3.72 |
| Thomas Polzer | 2 | 49 | 8.43 |
| Ulrich Schmid | 3 | 127 | 17.24 |
| Andreas Steininger | 4 | 308 | 49.17 |
| Michael Hofbauer | 5 | 12 | 5.72 |
| Kurt Schweiger | 6 | 13 | 3.74 |
| Horst Dietrich | 7 | 8 | 0.80 |
| Kerstin Schneider-Hornstein | 8 | 10 | 3.55 |
| Horst Zimmermann | 9 | 10 | 2.53 |
| Kay-Obbe Voss | 10 | 8 | 0.80 |
| Bruno Merk | 11 | 8 | 0.80 |
| Michael Hajek | 12 | 8 | 0.80 |