Name
Abstract | ||
|---|---|---|
Surface mount technology has spurred a rapid decrease in the size of electronic packages, where solder bump inspection of surface mount packages is crucial in the electronics manufacturing industry. In this study we demonstrate the feasibility of using a 230 MHz ultrasonic transducer for nondestructive flip chip testing. The reflected time domain signal was captured when the transducer scanning the flip chip, and the image of the flip chip was generated by scanning acoustic microscopy. Normalized cross-correlation was used to locate the center of solder bumps for segmenting the flip chip image. Then five features were extracted from the signals and images. The support vector machine was adopted to process the five features for classification and recognition. The results show the feasibility of this approach with high recognition rate, proving that defect inspection of flip chip solder bumps using the ultrasonic transducer has high potential in microelectronics packaging. © 2013 by the authors; licensee MDPI, Basel, Switzerland. |
Year | DOI | Venue |
|---|---|---|
2013 | 10.3390/s131216281 | SENSORS |
Keywords | Field | DocType |
defect inspection,flip chip,support vector machine,ultrasonic inspection,biomedical research,bioinformatics | Transducer,Ultrasonic testing,Ultrasonic sensor,Flip chip,Microelectronics,Surface-mount technology,Electronic engineering,Soldering,Thermal copper pillar bump,Engineering | Journal |
Volume | Issue | ISSN |
13 | 12.0 | 1424-8220 |
Citations | PageRank | References |
6 | 0.71 | 6 |
Authors | ||
5 | ||
Name | Order | Citations | PageRank |
|---|---|---|---|
| Lei Su | 1 | 6 | 0.71 |
| Tielin Shi | 2 | 90 | 17.20 |
| Zhensong Xu | 3 | 6 | 0.71 |
| Xiangning Lu | 4 | 19 | 3.51 |
| Guanglan Liao | 5 | 36 | 9.69 |