Title
22.6 A fully integrated counter-flow energy reservoir for 70%-efficient peak-power delivery in ultra-low-power systems.
Abstract
Recent advances in circuits have enabled significant reduction in the size of wireless systems such as implantable biomedical devices. As a consequence, the battery integrated in these systems has also shrunk, resulting in high internal resistances (∼10kΩ). However, the peak-current requirement of power-hungry components such as radios remains in the mW range, and hence cannot be directly supplied from the battery. Therefore, duty-cycled architectures such as pulsed-based radios have been proposed that transmit a short burst (∼1µs) of high power (∼10mW) supplied by an internal energy storage capacitor [1–3]. The capacitor is then recharged using a current limiter to protect the battery from excessive droop. This paradigm raises two challenges: 1) to supply sufficient energy, very large capacitance (u003e50nF) is often needed (200mV droop, for 10mW and 5µs), leading to large die area or bulky off-chip discrete components; 2) only a small fraction (∼5%) of energy stored in the capacitor is actually delivered to the high power components since the capacitor can only be discharged by a few 100s of mV while maintaining proper circuit operation (Fig. 22.6.1).
Year
Venue
Field
2017
ISSCC
Capacitance,Capacitor,Computer science,Electric power system,Electronic engineering,Decoupling capacitor,Current limiting,Battery (electricity),Electronic component,Electrical engineering,Voltage droop
DocType
Citations 
PageRank 
Conference
1
0.39
References 
Authors
2
6
Name
Order
Citations
PageRank
Xiao Wu1113.75
Kyo-jin Choo2418.52
Yao Shi3234.92
Li-Xuan Chuo4102.42
Dennis Sylvester55295535.53
David Blaauw68916823.47