Name
Title | ||
|---|---|---|
Admittance Control Based Human-in-the-Loop Optimization for Hip Exoskeleton Reduces Human Exertion during Walking |
Abstract | ||
|---|---|---|
Human-in-the-loop (HIL) optimization usually optimizes assistive torque of exoskeletons to minimize the human's energetic expenditure in walking, quantified by metabolic cost. This formulation can, however, result in altered gait pattern of the human joint from the natural pattern, which is undesired. In this paper, we proposed a novel concept of HIL optimization of a hip exoskeleton. The optimization goal was to maintain the hip kinematics while providing optimal mechanical energy from the exoskeleton by modulating the admittance control. Policy iteration was used to optimize the switching time within the gait phase, at which a single parameter of the admittance controller was altered to provide assistance. The stiffness and equilibrium angle were considered as the two parameters for altering at the switching time, resulting in three possible modes of operation for the algorithm: (i) switching the equilibrium point, (ii) switching stiffness while equilibrium point is set at maximum extension and, (iii) maximum flexion. The optimization algorithm was found to converge for all three modes, with the equilibrium mode resulting in multiple solutions. Further analysis of power injected by the exoskeleton in the three modes showed that the first and third mode reduced human energetic exertion while the second mode increased human exertion. Implications of the results as well as the observed muscle activation patterns in response to assistance are discussed. |
Year | DOI | Venue |
|---|---|---|
2022 | 10.1109/ICRA46639.2022.9811553 | IEEE International Conference on Robotics and Automation |
DocType | Volume | Issue |
Conference | 2022 | 1 |
Citations | PageRank | References |
0 | 0.34 | 0 |
Authors | ||
5 | ||