A Multilevel Bottom-Up Optimization Methodology for the Automated Synthesis of RF Systems | 3 | 0.43 | 2020 |
Synthesis of mm-Wave Wideband Receivers in 28-nm CMOS Technology for Automotive Radar Applications | 0 | 0.34 | 2020 |
Flexible Setup for the Measurement of CMOS Time-Dependent Variability With Array-Based Integrated Circuits | 1 | 0.43 | 2020 |
Yield-aware multi-objective optimization of a MEMS accelerometer system using QMC-based methodologies | 0 | 0.34 | 2020 |
Ready-To-Fabricate Rf Circuit Synthesis Using A Layout- And Variability-Aware Optimization-Based Methodology | 0 | 0.34 | 2020 |
New method for the automated massive characterization of Bias Temperature Instability in CMOS transistors | 0 | 0.34 | 2019 |
Two-Step RF IC Block Synthesis with Pre-Optimized Inductors and Full Layout Generation In-the-loop | 4 | 0.54 | 2019 |
A Versatile CMOS Transistor Array IC for the Statistical Characterization of Time-Zero Variability, RTN, BTI, and HCI. | 2 | 0.58 | 2019 |
Generation of Lifetime-Aware Pareto-Optimal Fronts Using a Stochastic Reliability Simulator | 0 | 0.34 | 2019 |
A two-step surrogate modeling strategy for single-objective and multi-objective optimization of radiofrequency circuits | 0 | 0.34 | 2019 |
CMOS Characterization and Compact Modelling for Circuit Reliability Simulation | 0 | 0.34 | 2018 |
Quasi-static PEEC planar solver using a weighted combination of 2D and 3D analytical Green's functions and a predictive meshing generator. | 0 | 0.34 | 2018 |
A Comparison of Automated RF Circuit Design Methodologies: Online Versus Offline Passive Component Design. | 0 | 0.34 | 2018 |
Analysis of Body Bias and RTN-Induced Frequency Shift of Low Voltage Ring Oscillators in FDSOI Technology | 0 | 0.34 | 2018 |
Enhanced systematic design of a voltage controlled oscillator using a two-step optimization methodology. | 1 | 0.37 | 2018 |
Guest Editorial Special Issue on Selected Papers from PRIME 2017 and SMACD 2017. | 0 | 0.34 | 2018 |
A novel design methodology for the mixed-domain optimization of a MEMS accelerometer. | 0 | 0.34 | 2018 |
CASE: A reliability simulation tool for analog ICs | 3 | 0.57 | 2017 |
New mapping strategies for pre-optimized inductor sets in bottom-up RF IC sizing optimization | 1 | 0.36 | 2017 |
A transistor array chip for the statistical characterization of process variability, RTN and BTI/CHC aging | 3 | 0.64 | 2017 |
An Automated Design Methodology of RF Circuits by Using Pareto-Optimal Fronts of EM-Simulated Inductors. | 8 | 0.63 | 2017 |
A Size-Adaptive Time-Step Algorithm For Accurate Simulation Of Aging In Analog Ics | 2 | 0.59 | 2017 |
Systematic design of a voltage controlled oscillator using a layout-aware approach | 1 | 0.36 | 2017 |
An inductor modeling and optimization toolbox for RF circuit design. | 5 | 0.45 | 2017 |
Optimization of a MEMS accelerometer using a multiobjective evolutionary algorithm | 0 | 0.34 | 2017 |
Layout-aware challenges and a solution for the automatic synthesis of radio-frequency IC blocks | 0 | 0.34 | 2017 |
Including a stochastic model of aging in a reliability simulation flow | 3 | 0.48 | 2017 |
Introduction to the special issue on PRIME 2016 and SMACD 2016 | 0 | 0.34 | 2017 |
TARS: A toolbox for statistical reliability modeling of CMOS devices | 2 | 0.61 | 2017 |
Radio-frequency inductor synthesis using evolutionary computation and Gaussian-process surrogate modeling. | 4 | 0.49 | 2017 |
Extending the frequency range of quasi-static electromagnetic solvers | 1 | 0.43 | 2017 |
Reliability simulation for analog ICs: Goals, solutions, and challenges. | 6 | 1.21 | 2016 |
Comparison of QMC-based yield-aware pareto front techniques for multi-objective robust analog synthesis. | 1 | 0.40 | 2016 |
Introduction to the special issue on SMACD 2015 | 0 | 0.34 | 2016 |
Accurate synthesis of integrated RF passive components using surrogate models | 0 | 0.34 | 2016 |
Frequency-dependent parameterized macromodeling of integrated inductors | 0 | 0.34 | 2016 |
SIDe-O: A toolbox for surrogate inductor design and optimization | 0 | 0.34 | 2016 |
Optimization of LDO voltage regulators by NSGA-II | 1 | 0.36 | 2016 |
Design space exploration using hierarchical composition of performance models | 1 | 0.36 | 2015 |
On the convex formulation of area for slicing floorplans | 0 | 0.34 | 2015 |
Physical vs. surrogate models of passive RF devices | 0 | 0.34 | 2015 |
Automated Generation of the Optimal Performance Trade-Offs of Integrated Inductors | 7 | 0.63 | 2014 |
An Efficient Evolutionary Algorithm for Chance-Constrained Bi-Objective Stochastic Optimization | 11 | 0.64 | 2013 |
Self-adaptive lower confidence bound: A new general and effective prescreening method for Gaussian Process surrogate model assisted evolutionary algorithms | 2 | 0.44 | 2012 |
A technique for the optimization of the parameters of technical indicators with Multi-Objective Evolutionary Algorithms | 2 | 0.40 | 2012 |
Layout-aware Pareto fronts of electronic circuits. | 3 | 0.40 | 2011 |
Pathological Element-Based Active Device Models and Their Application to Symbolic Analysis. | 35 | 2.26 | 2011 |
A template router | 2 | 0.42 | 2011 |
LDS - A description script for layout templates | 3 | 0.54 | 2011 |
Stopping Criteria In Evolutionary Algorithms For Multi-Objective Performance Optimization Of Integrated Inductors | 4 | 0.45 | 2010 |